|
Our US Distributor: |
![]() |
|
|
|
|
|||||||||||
|
This proven technology transmits a signal 24 hours day
directly into the circulating water system - releasing fixed Chlorine or
Bromine, coagulating suspended solids, improving filter performance, and
saving water and energy. Preventing Scale Formation Scale formation is a problem in many areas, particularly
in hard water areas. Pools with high levels of pH and total alkalinity, and
those that are run at high temperatures, are particularly susceptible. Under
these conditions, scale is likely to form on pool surfaces, covers, pipes
and fittings. How it works When power is applied to the Aquaklear system, an
electric field is generated in the water by the ferrite ring. Flocculation
of the particles in the water then occurs. The flocculated particles sit on
top of the sand filter, but still allow the water to pass through. This
results in an improved water clarity, reduced duration of backwashing, and
where required, reduced backwashing frequency. The quantity of water
expelled during backwashing process may therefore be cut by up to half. Installation Summary • Non-invasive (No installation down-time)
|
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
|
© All rights reserved to Hydropath USA 2008 |
|||||||||||||||||||||||||||||